Tips for Using an Oscillating Saw


You want a saw that can be used for numerous everyday jobs but you don’t have any idea what to purchase? If you want to save room, money, and possess a saw with various functions, variable speeds, and attachments like a sand pad, scraper blade, tile grout removal tool, or cut blade, then you most likely need an oscillating saw. Oscillating saws were developed a long time ago in Germany and they have been cherished by handymen who work with all kinds of materials. Also referred to as multi-tools, they can be used for a range of preservation, revamp or remodeling activities.

The oscillating saw is a comparatively new easily portable power device but has by now won the approval of many contractors, woodworkers, and anyone who does their repairs by themselves. Created as far back as the ‘60s, it presents a safe, yet fast way to cut materials into smaller pieces or fine tune them. The inaugural woodworking equivalent of this instrument was added in the 1990s.

In the present day, the oscillating saw is a seriously resourceful power tool. It is compatible with accessories for cutting, sanding, scraping, polishing, and grinding. Additionally, it will cut through almost all building materials, including metal, drywall, wood, cement, plastic, mortar, fiberglass, and so on.

Oscillating saws are very helpful at any time one needs to cut, plunge cut, scuff, grind, eliminate grout, and much more. The grand thing in relation to this saw is that it can be used without difficulty, thanks to its modest size and numerous blades and pads. In addition, oscillating saws can be used by both professionals and amateurs alike.

Features of an Oscillating Saw

Prior to moving on to the tips, it is imperative to draw attention to some of the major attributes of any oscillating saw. First of all, everybody should know that there are corded and cordless oscillating saws obtainable. In spite of the ease and flexibility cordless saws present, they are, in general, less powerful than corded devices.

Almost all oscillating saws comprise a simple, sliding switch that turns the tool on and off. As for the motor, it differs depending on the model, which means that not all oscillating saws comprise the same power. The transmission also referred to as the gearbox, is an essential aspect when looking to purchase the best oscillating saw, as it dictates the speed range of the saw. In addition, the speed control dial is present in all the devices that are obtainable on today’s national market.

Oscillating saws also feature a blade clamp that secures the head in place, a covering that shields the internal parts and a handle. Some new devices also feature a dust removal port or a vacuum cleaner that allows the user to work on a clean surface. To use an oscillating saw, these are a few good tips to consider:

Oscillating saws can be used by nearly everybody, for numerous activities. Need to cut, remove grout, sand, or grip? Then this is the ideal tool for expert and home use.

Here is what you can do using an oscillating tool:

Sawing

Sawing

If you are looking to make flawless cuts through susceptible or thin materials, saw blades can help you obtain just the right results. You can cut through plastics, fiberglass, aluminum, plasterboard, copper, and more. Depending on the work, you can decide to use high-speed steel blades, high carbon steel blades, and bi-metal and so on.

Scraping

Scraping

Next time you need to scrape paint, adhesives, stickers, carpets or silicone from any material, do not bother hiring a contractor. An oscillating saw can help you do the work yourself. In addition, keep in mind that a bit of petroleum jelly will help you scrape better and quicker, as the adhesive will not glue to the blade.

Sanding

Sanding

Sanding and polishing are simple tasks when using a multi-tool. Using the accurate accessories, you can sand wood, metal, and a lot more. So, an oscillating saw can be used for sanding. The trendiest sanding accessory is a big triangular-shaped pad, which is efficient when smoothing broad, flat surfaces. On the other hand, there are also numerous sizes of narrow, pointed sanding “fingers” that let you sand in narrow crevices and tight corners.

To Trim Doors

Trim Doors

When it is time to install a new floor, you may be required to tidy the base ends of the door jambs and casings in order for the flooring to fit snugly. The oscillating saw is perfect for a job like this. Take a piece of the new flooring and place it turned downwards on the subfloor as close as possible to next casing (this will let you know the height you need to cut, but won't have you grazing up the quality flooring side before you have even got going). Connect a flush-cutting wood blade to the multi-tool. Then hold the blade flat against the flooring and plunge-cut straight into and through the casing. Remove the severed piece of wood, and the new flooring will slide right beneath the casing.

To Cut Pipes

Cut Pipes

The oscillating saw can also be used to cut plumbing pipes to fit the exact size you are looking for. The saw is used to cut the pipes into smaller pieces which will make the pipes easy to fit in the desired space you want.

You should also bear in mind these tips:

  • The side-to-side motions will assist you to get better results
  • You should only make thrust cuts in soft materials
  • Don’t use the same sanding pad for all the surfaces
  • Make certain to put identical pressure on the entire sanding surface
  • Choose the highest oscillation rates for scraping

Check the surface for metal pieces like nails or screws. Unless the blade you choose is able to cut through them, they signify annoying obstacles. An oscillating saw is perfect for cutting through baseboard, door casings, and other interior trim. On the other hand, when cutting moldings, be certain to use a mixture of wood/metal cutting blade. That way, should you come in contact with a nail; you will be able to cut right through it devoid of ruining the blade. These are the tips for using an oscillating saw. I hope this article is helpful for people without the technical know-how of using an oscillating saw. So, not only professionals can use an oscillating saw—your average weekender DIYer can use them with great success too.

 


Leave a comment


Please note, comments must be approved before they are published